Improvements: Instabug is now properly reporting logs for the 'shake' feature. Sensors will now show signal strength in Settings. Fixes: Resolved a bug where you could drag the video around freely in the events screen viewer. Automations will now present a 'Confirm' button in the top right when toggling actions on/off. Fixed a bug in automations that was causing the 'Delete' button to float into the conditions area. Z-Wave door locks and garage controllers now properly show 'Offline' when the device is offline.

Improvements: Instabug is now properly reporting logs for the 'shake' feature. Sensors will now show signal strength in Settings. Fixes: Resolved a bug where you could drag the video around freely in the events screen viewer. Automations will now present a 'Confirm' button in the top right when toggling actions on/off. Fixed a bug in automations that was causing the 'Delete' button to float into the conditions area. Z-Wave door locks and garage controllers now properly show 'Offline' when the device is offline.

Critical Instabug Patch: Fix for Unexpected App Crashes

New Features New automations to support doorbell press, motion detection, and schedule. A new UI and flow will also come with this release of automations. Note: See end of page for functionality explanation. Users will receive an in app prompt when an update for the app is available. Improvements: New Z-Wave add/remove flow. Updated ‘Stay Signed In’ options to allow for one month before the application logs you out. Updated the ‘Siren’ icon to match the panel. Updated the ‘Device Health’ section for cameras/doorbells to include the ‘WiFi Link Quality’ and the 'WiFi Signal Level. Enhanced the Arm/Disarm snapshot seen in the Activity section so it can be clicked on and expanded. Live view home control will not allow you to arm stay/away if there is a system trouble. Updated support for the translator and takeover module. They are now using the correct icons, and the translator is able to be ‘Bypassed’. The microphone on the wired doorbell(XDC01) now opens/closes correctly without erroring or leaving the line open. Added a ‘Wake Up’ feature to D3 camera settings. This wakes the camera up when settings are entered for battery powered devices to ensure that settings save properly. Fixes: Forgot password now gracefully handles users that have an email address tied to multiple accounts. Fixed a bug that would cause the login page to lag after switching to a linked account and logging out. Added a ‘Cancel’ button to the Disarm screen on the ‘Security’ page. The temperature indicator on the Security page is now only clickable if you click directly on it. Increased the size of the multi-select ellipses for video events and filters. Added a ‘Maximize’ button to the portrait view of live video. Updated the camera SDK so it updates the battery percentage after the camera is completely drained. Door locks can be properly controlled on the live view home control page without receiving an ‘Oops’ error. Garage door commands are now working properly in live view home control. This section was not in sync with the actual status of the garage door before. New Automations Functionality: Each camera is allowed one motion detection automation. If you want to edit the condition, you just click on the created automation and it will drill into it. There is a delete button once you drill into it if you prefer to start over instead of editing the automation. Doorbells are allowed one motion detection and one doorbell press automation each. The functionality for doorbell press is the same as motion detection mentioned above. The new schedule functionality is listed as “Days of the week at set time” in automations. This automation is pretty straightforward, you set a time and days of the week. After those are set, you pick your action and save when you are complete. You can set up multiple automations for this rule.

Improvements: Z-Wave add/remove functionality has been greatly improved. You can now also add/remove devices within the same flow. Arm/Disarm response has been greatly improved. Adding a confirmation when creating a new user account to let the user know the account was created successfully. Improved the Thermostat add process. Updated the user experience when resetting a password. If the current user resets their password, they will be logged out. If they reset another users password, they will not be logged out anymore. Users should not see phantom Z-Wave devices anymore. Z-Wave notification functionality has been greatly improved. Sensor bypass is only available when the system is disarmed now. Updated type ‘User’ settings to restrict actions they should not have access to. Fixes: Fixed a bug that was causing the application to crash when opening a video related push notification. Fixed a bug that was cutting off the timestamp on events when you played them back. Fixed a bug that was causing the application to crash upon login. Thumbnails are now seen on press/motion push notifications. Automation toggles are now working correctly. Occasionally, hitting a toggle for one automation would change another. Camera live view is now working smoothly. Fixed a bug that was showing ‘arm’ instead of ‘disarm’ on live view controls when the panel is in alarm. The Ecolink Siren now shows the correct options on the control page. Fixed a bug that was causing errors on the account linking page when you attempted to do a pull down to refresh. Doorbell/motion push notifications are now correctly redirecting to the video page. Fixed a bug that was causing the automations screen to load placeholders only. Fixed aspect ratio issues on camera live view. Motion detection settings are now seen for the outdoor D3 camera(XOC01). Filters now properly clear on the video events page. Fixed a bug that was allowing users to attempt to dim with water control devices.

New Features: Granular automations is now available. This will give users the ability to separate automations actions for each supported device they have connected to their XP02 panel. Sunrise and Sunset automations to give users the ability to automate actions for their devices during these times. Night mode support has been added for Arm Stay. If enabled, this will bypass any alarm delays and put the system into alarm immediately. Improvements: Added descriptions to WiFi link quality for cameras so non technical users have a good idea of the signal strength. Updated lock rules so the application should correctly reflect lock/unlock. Added a walk through guide for automations. Fixes: Added a confirmation message to the unlink accounts section. Fixed a bug that was causing video events to duplicate when switching accounts. Fixed a bug that was causing the accounts view to display incorrectly after switching accounts. Fixed a bug that was causing information to not save in the account information section. Fixed a bug that was causing the back button to disappear when on the ‘Forgot Password Page’ Fixed a bug that was causing accounts to log out after 1 day even if they selected the 2 week option. Fixed a bug that was causing Rooms to not appear in Settings. Fixed a bug that was causing sensors to disappear from the notifications page.

New Features: Walkthrough for bypassing sensors. Improvements: Cameras now show offline from the live view page. Dealer activation enhancements. Improved connection and wakeup times for cameras. Updated link quality descriptions for cameras/doorbells to be more user friendly. Updated LED settings on cameras/doorbells. Added a ‘Siren’ option for live view control. Updated the UI for dark mode when viewing sensors. Updated filter settings under video events. Fixed a crash that happened when checking user details on a slave account. Fixed a bug that did not allow a user to change user settings if there was no panel attached. Fixed a bug that was causing the security status to not update properly on the Security page. Fixed a bug that was causing the application to show the incorrect status when in alarm. Fixed a bug that was causing keep me logged in for 2 weeks to not function correctly when biometrics was disabled. Fixed a crash that happened when a currently logged in user tried to view its user details. Fixed a crash that happened when assigning a Z-Wave device to a room. Fixed a bug that caused the application to load placeholders without any data in them. Fixed a crash that happened when switching accounts. Fixed a bug that caused sensor status to not update when in alarm. User’s are now informed of an open sensor when arming the system.

Introducing the new Prima by Napco mobile application. This application provides you with some exciting features to control your home security system. Security features include: Arming and disarming your panel Locking and unlocking your door locks Viewing and bypassing your sensors Video features include: Viewing motion and doorbell events Live viewing your cameras and doorbells Control features include: Managing Z-wave devices Climate features include: Setting your thermostat modes and temperature Automations to control the devices in your home.

Stability and performance improvements

Stability and performance improvements